The difficult problem of sharpening small blades has been solved with these smaller clamps for KME knife sharpeners.Replace the traditional clamps on any KME sharpener with these jaws.These clamps are perfect for small knives and those with a more narrow...

L-adapter is intended for mounting stock clamp onto the Blitz Pro sharpening systems. By positioning the clamps with the adapter on the frame edges, the maximum distance between clamps can be extended by 1 inch (24mm), thereby enhancing the capability...

Lightweight Titanium Rod for TSProf K03 helps to reduce the abrasive pressure on the cutting edge, which improves the control of the sharpening process when working with narrow stones, convex sharpening and finishing work.At one end it has a thread...

Empty Narrow Blanks are used with sharpening stones on guided knife sharpeners. Empty Blanks have a standard 45-degree bevel and are made of high-quality 3 mm thick aluminum.Dimensions: 160 x 12 x 3 mm (6 ⅓" x ½" x ⅛")Working...

The Edge Pro Apex Bench Mount gives you the ability to mount your Apex knife sharpener to any working surface and drastically increases the stability of the machine overall adding great value to your sharpening setup. This mounted knife sharpener...

6" x 1" Stropping Pad consists of Gunny Cloth composite material with PSA tape for mounting on a empty blank (not included).Gunny Cloth is polymer matrix with embedded soft metal powders. The addition of Gunny Juice diamond emulsion charges the...

Tsushima Natural Nagura stones are used to create a honing paste on the surface of natural stones in order to refine the grit structure and give the stone a better bite on the edge being sharpened. Tsushima Nagura stones are...

Tsushima Whetstones are used for fine sharpening on KME or Hapstone knife sharpeners. Tsushima is a natural stone with an estimated grit approximately 5000 JIS.Tsushima (対馬) Whetstone is mined on Tsushima Island off the coast of Nagasaki Prefecture in Japan.Tsushima...

Tuffite sharpening stones are used for finish sharpening knives on Edge Pro sharpener. Tuffite stone is natural abrasive material of high density. Tuffite stones have approximately 6 mm thickness and mounted on high quality aluminum blanks with laser engraving.Tuffite stone...

Boride Sharpening Stones are used for sharpening knives on Hapstone Pro sharpeners. Boride offers a wide range of stones with different performance values and different rates of wear. Boride stones are made of aluminum oxide, with the exception of CS-HD...

Hapstone CBN Plates are made in Edge Pro form-factor and is used for sharpening knives on Hapstone, TSProf, and all Edge Pro compatible guided sharpening systems. CBN (Cubic Boron Nitride) is the second-hardest material after diamond.CBN Plate consists of a CBN-bearing...

Blitz 360 Hinge unit. More freedom of movement with a hinge that rotates 360 degrees. Helps with sharpening long knives. Thanks to the retractable rod, the maximum sharpening angle with the Blitz 360 hinged joint is 35° per side.

Boride sharpening stones are used for sharpening knives on Edge Pro sharpeners. Boride offers a wide range of stones with different performance values and different rates of wear. Boride CS-HD series stones are made of silicon carbide. All Boride stones...

Boride sharpening stones are used for sharpening knives on Edge Pro sharpeners. Boride offers a wide range of stones with different performance values and different rates of wear. Boride T2 series stones are made of aluminum oxide. All Boride stones...

8mm Spring-Assisted Stopper Ring to limit the movement of the horizontal shaft in the pivot unit.  The stopper is suitable for 8mm guide rods and compatible with 8mm Edge Pro Apex and the 8mm KO3.

Turkish Oil Stone (Pierre Du Levant) is very rare sharpening stone used for super finish sharpening knives on KME or Hapstone knife sharpeners. Turkish Oilstones are mounted on high-quality aluminum blanks.Turkish Oilstone was mined on Crete island in Greece. The estimated...

Attention to international customers. Many countries such as Canada and Australia imposed prohibitive import tariffs for products of Russian origin. We suspend international shipping of TSPROF sharpening systems.TSProf K03 is a high-precision guided knife sharpening system. TSProf is high-precision CNC...

The Sharpener stand is a metal base holding TSProf K03 sharpener on the working surface of the table or workbench.It allows you to install the TSPROF Knife Sharpener at any place of the desktop; it is also useful in cases...

Sorry diamond lovers, but graphene is the most awesome form of carbon out there. Evidence: Andre Geim and Konstantin Novoselov, the two Russian-born scientists who isolated one-atom-thick sheets of the graphene in 2004, won the Nobel Prize in 2010. Graphene...

Belgian Coticule Whetstones are used for super finish sharpening on KME or Hapstone knife sharpeners.Yellow Coticule is mined in the Ardennes mountains in Belgium. Coticule is ultra-fine natural stone with a high garnet content, with estimated grit approximately 8000-12000 JIS....

TSPROF K03 Pro is an updated version of K03, the most famous Russian knife sharpener. TSProf is high-precision CNC machining, wear-resistant materials, the tightest tolerances, and strict quality control for each unit. K03 Pro will help you get a perfectly...

Universal Convex Adapter with a range of 4.3, 7.2, AND 10.7 degrees.Convex sharpening provides high cutting capabilities to the blade while maintaining high strength of the cutting edge. The convex edge acts as a wedge, moving apart up the material...