The Single Clamp is a symmetric swivel clamp for double-sided sharpening without reinstalling the knife. The design of the clamp allows rigidly and symmetrically clamp knives with blades of complex geometry. It well fits hunting knives and folding knives with...

Designed for mounting the standard K03 and Kadet clamps on the turning frame. Positioning the clamps with the adapter on the edges of the frame allows an increase effective length of the frame by 4 cm. This extends the clamping...

Clamps designed for sharpening fillet-knives, multi-tools, Scandinavian type knives.Mathematically verified radial-convex shape of the outer surface allows you to set the sharpening angle of only 7.2° per side. Heavy-duty material, aviation aluminum, and new processing technologies have allowed achieving a...

TSProf K03 Pro Convex Attachment is mounted on the abrasive holder and provides a uniform angle change across the entire width of the secondary bevels, producing a radius shape of the lens as a result of the work. Suitable for...

The small universal table is suitable for sharpeners with 20 mm clamping frame (TSPROF K03 and the last versions of K02). If you a not sure which sharpener you have, please contact you manager to find out the details. You...

Axicube-Integrated Angle Finder (Axicube-I) measures the sharpening angle with an accuracy of 0.1° and helps to monitor and trace any changes in the angle, in real-time, e.g. when changing abrasives. The bright display is easy to read in all lighting conditions....

The Sharpener stand is a metal base holding TSProf K03 sharpener on the working surface of the table or workbench.It allows you to install the TSPROF Knife Sharpener at any place of the desktop; it is also useful in cases...

TSPROF Kadet whole-milled fillet clamps are designed for fixing knives with a spine thickness of up to 3.5 mm, on a TSPROF Kadet Expert sharpening system. The radially convex shape of the outer surface allows you to set the minimum...

Universal Convex Adapter with a range of 4.3, 7.2, AND 10.7 degrees.Convex sharpening provides high cutting capabilities to the blade while maintaining high strength of the cutting edge. The convex edge acts as a wedge, moving apart up the material...

Extension Rod is designed for Pioneer, Kadet, and Blitz sharpening systems of all modifications. It is made of chrome-plated steel and has an extended length (325 mm) compared to the standard (225 mm). It connects to the abrasive holder for...

Increased thickness of the spring provides exceptional clamping stability. They are intended for operations with the raised loading (for example at roughing operation on firm steels). Material:steel 65G ground, heat-treated; Thickness: 1 mm (standard 0.8 mm); Abrasive load, without deviations:...

Abrasive holder limiter 6 mm for Kadet, Pioneer, and Kadet Series. Designed to limit the movement of the abrasive holder and prevent damage to the blade by abrasive. It is supplied with an elastic dampener to soften the impact on...

Axicube-Integrated Angle Finder (Axicube-I) is a new product from TSPROF, designed to improve the accuracy and stability of the sharpening angle adjustment on the TSPROF K03 sharpening system. The device is integrated into the abrasive holder rod, which significantly increases the...

The Axicube One Sharpening Angle Finder (Rev 2) is designed for high-precision measurement of angles between planes and the inclination of a surface from the horizontal and vertical levels. MEMS (Micro Electro Mechanical System) technology with ultra-precise electronic sensors of...

Wholemilled clamps are made of high-strength aluminum alloy with a protective coating and heat treatment. This type of clamps provides the highest rigidity and stability of the device operation.- Spine thickness up to 4.5 mm- Jaws width: 20 mmFor 2mm...

The increased spring thickness provides exceptional clamping stability. They are designed for operations with high loads (for example, in a roughing operation on solid steels). Material: 65G steel, ground, heat-treated; Thickness: 1 mm (standard 0.8 mm); Load on abrasive, without...

Anodized Knobs are designed to move pinion on the rack to set desired sharpening angle. Knobs are made of high-strength aluminum alloy with colorless anodizing. The kit includes 2 knobs. Requires 2-mm hex key or screwdriver to replace stock knobs.

Designed for upgrading Blitz and Blitz 360 sharpening systems. It consists of an extended frame of the rotary mechanism and whole-milled aluminum clamps.The frame and clamps are made of aircraft aluminum, with black anodizing according to the international Qualanod standard....

Convex mini attachment for Blitz and Kadet knife sharpeners is easily mounted on the abrasive holder with the help of an internal mounting screw and provides a maximum offset of the sharpening angle of 11.2°. The attachment provides a uniform change...

Wholemilled clamps are made of high-strength aluminum alloy with a protective coating and heat treatment. This type of clamps provides the highest rigidity and stability of the device operation.Due to the monolithic design of the clamps, the main advantage of...