K03 Whole Milled Fillet Clamps

Clamps designed for sharpening fillet-knives, multi-tools, Scandinavian type knives.

Mathematically verified radial-convex shape of the outer surface allows you to set the sharpening angle of only 7.2° per side. Heavy-duty material, aviation aluminum, and new processing technologies have allowed achieving a minimum thickness of the jaws, without loss of wear resistance. The width of the clamps is selected in such a way as to allow you to install up to 4 clamps simultaneously on the frame to securely fix even the most flexible fillet-knife.

The clamps do not require calibration and are clamped by tightening just one screw.

• Minimum sharpening angle: 7.2°
• Recommended knife length: 30-300mm
• Minimum width of a knife: 10mm
• Jaws thickness: 1mm
• Clamp width: 21mm
• The maximum thickness of the spine: 3.5mm
• For the screwdriver: 2.5mm