Designed for mounting the standard K03 and Kadet clamps on the turning frame. Positioning the clamps with the adapter on the edges of the frame allows an increase effective length of the frame by 4 cm. This extends the clamping...

Convex mini attachment for Blitz and Kadet knife sharpeners is easily mounted on the abrasive holder with the help of an internal mounting screw and provides a maximum offset of the sharpening angle of 11.2°. The attachment provides a uniform change...

The small universal table is suitable for sharpeners with 20 mm clamping frame (TSPROF K03 and the last versions of K02). If you a not sure which sharpener you have, please contact you manager to find out the details. You...

Clamps designed for sharpening fillet-knives, multi-tools, Scandinavian type knives.Mathematically verified radial-convex shape of the outer surface allows you to set the sharpening angle of only 7.2° per side. Heavy-duty material, aviation aluminum, and new processing technologies have allowed achieving a...

TSPROF Kadet whole-milled fillet clamps are designed for fixing knives with a spine thickness of up to 3.5 mm, on a TSPROF Kadet Expert sharpening system. The radially convex shape of the outer surface allows you to set the minimum...

Kadet Whole Milled Clamps are designed for fixing knives with a spine thickness of up to 7 mm. Suitable for Kadet, Pioneer, and K03 sharpeners. The clamps are made of a single piece of durable aircraft aluminum alloy and do...

The increased spring thickness provides exceptional clamping stability. They are designed for operations with high loads (for example, in a roughing operation on solid steels). Material: 65G steel, ground, heat-treated; Thickness: 1 mm (standard 0.8 mm); Load on abrasive, without...

Abrasive holder limiter 6 mm for Kadet, Pioneer, and Kadet Series. Designed to limit the movement of the abrasive holder and prevent damage to the blade by abrasive. It is supplied with an elastic dampener to soften the impact on...

Special clamp for narrow fillet knives with reduced sharpening angle.It is an exclusive clamp for narrow fillet knives, with reduced sharpening angle. The thin clamping jaws are made of structural spring steel, which provides sufficient clamping force. This clamp has modified jaws...

Sharpening Angle Extender expands the sharpening capabilities of TSProf K03. 

The Single Clamp is a symmetric swivel clamp for double-sided sharpening without reinstalling the knife. The design of the clamp allows rigidly and symmetrically clamp knives with blades of complex geometry. It well fits hunting knives and folding knives with...

Increased thickness of the spring provides exceptional clamping stability. They are intended for operations with the raised loading (for example at roughing operation on firm steels). Material:steel 65G ground, heat-treated; Thickness: 1 mm (standard 0.8 mm); Abrasive load, without deviations:...

Double Clamps securely hold a blade of any shape, ensuring that the jaws fit the knife back surfaces and free access to the blade for sharpening. The clamps design is based on three main components: the base, flat springs, and...

Wholemilled clamps are made of high-strength aluminum alloy with a protective coating and heat treatment. This type of clamps provides the highest rigidity and stability of the device operation.Due to the monolithic design of the clamps, the main advantage of...

Extension Rod is designed for Pioneer, Kadet, and Blitz sharpening systems of all modifications. It is made of chrome-plated steel and has an extended length (325 mm) compared to the standard (225 mm). It connects to the abrasive holder for...